Fujioh Ventilation Hood BUF 01 User Manual

Installation Manual  
RANGE HOOD  
MODEL:BUF-01  
BUF-02  
TABLE OF CONTENTS  
Safety Instructions .................................................................................................. 2  
Name of Parts ......................................................................................................... 4  
Size & Dimensions .................................................................................................. 4  
Range Hood Location ............................................................................................. 5  
Installation ............................................................................................................... 6  
1. Preparation ..................................................................................................... 6  
2. Range Hood Mounting .................................................................................... 8  
3. Connecting Power Supply Wires ................................................................... 10  
4. Final Assembly and Check............................................................................ 12  
5. Explanation to the End User ......................................................................... 13  
Circuit Diagram ..................................................................................................... 13  
READ AND SAVETHESE INSTRUCTIONS.  
Keep this manual in a convenient place for future reference.  
FUJI INDUSTRIAL CO., LTD.  
1U030584  
 
CAUTION  
1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and  
vapors.  
2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent  
exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.  
3. Read specification label on this product for further information and requirements.  
4. Use only for the purpose of kitchen ventilation.  
5. Do not install this range hood in the bathroom or in other wet rooms since electrical shock  
and damage may result.  
6. Fasten the filter and other parts securely. Incorrect attachment may result in personal injury  
or property damage.  
7. Keep your hands and other objects away from the fan while it is in motion.The range hood  
may injure you or damage itself.  
NOTE:The safety instructions are explained with the following  
pictographic symbols.  
: means prohibition. It indicates actions, if any, that  
mustn’t be done.  
: means forcible execution. It indicates actions, if any,  
that must be done.  
3
 
NAME OF PARTS  
- Accessories -  
Screw M5×30  
Four (4) pieces  
Nut with plate  
Four (4) pieces  
SIZE & DIMENSIONS  
(Unit : inch)  
4
 
RANGE HOOD LOCATION  
The range hood must be installed just above the cooktop.  
1
2
3
The minimum distance from the cooking surface to the bottom of the range hood  
must be 24".  
The total weight of the BUF-01/BUF-02 range hood unit is:  
BUF-01/BUF-02 ----- 18 lbs. (8 kg)  
Power requirements are:  
4
BUF-01 AC120 V, 60 Hz, 1.3 Amp  
BUF-02 AC120 V, 60 Hz, 2 Amp  
CAUTION  
• Check that the hood is correctly installed, since incorrect installation could result  
in the detachment of the range hood and the unit fall.  
To protect hands from injury, wear working gloves when installing the range hood.  
5
 
INSTALLATION  
1. PREPARATION  
WARNING  
• If the range hood is not installed properly, it could become detached and fall.  
• Ensure that the metal duct does not touch other metal housing materials,  
otherwise fire or electric shock could result.  
This range hood is designed to  
discharge upward. For vertical discharge,  
run duct work between the hood location  
and roof cap location.  
To get the best result, use a minimum  
number of transitions and elbows. Be  
sure to attach a roof cap to avoid leaking  
rain in the end.  
1
The range hood unit must be mounted to a liner which has the following  
dimensions. Install the liner securely after checking that the opening size of the  
liner is the same as the figure below.  
2
CAUTION  
The liner should be installed tightly. If the liner installation is not correct, the range  
hood unit may become detached and fall.  
6
 
INSTALLATION (continued)  
Run house wiring between service panel and hood location.  
Prepare the range hood unit.  
3
4
(1) The range hood is supplied with the  
exhaust pipe fixed on its top plate.  
(2) Provide a transition duct (not  
supplied) to connect the exhaust  
pipe and external duct.The  
diameter of the transition duct  
should be more than 6".  
(3) Be sure to keep 1-3/16" overlapping  
length of the exhaust pipe and  
transition duct.  
7
 
INSTALLATION (continued)  
2. RANGE HOOD MOUNTING  
Hold up the range hood unit and insert it into the opening of the liner. When the 4  
securing plates on both sides have passed through the top of the liner, turn them  
outward to secure the range hood on the liner temporarily. Make sure that the top  
of the exhaust pipe is inserted into the bottom of the transition duct.  
1
8
 
INSTALLATION (continued)  
Remove 4 screws which are fixed to the front cover. The front cover swings open  
90° as shown in Fig.  
2
CAUTION  
Do not detach the front cover from the range hood unit.The hinge may be damaged.  
Align 4 screw holes of the liner and range hood unit, then fix securely using the  
supplied screws and nuts.  
3
NOTE  
Fasten all screws and nuts evenly.  
Make the duct joint secure and air tight  
using non-flammable tape such as duct  
tape, etc. (not supplied)  
4
NOTE  
Make sure that the shutter installed in  
the exhaust pipe moves freely.  
9
 
INSTALLATION (continued)  
3. CONNECTING POWER SUPPLY WIRES  
WARNING  
• Electrical wiring should be done by a qualified person(s) in accordance with all-  
applicable codes and standards, including fire-rated construction. An unqualified  
person doing the work could result in fire, electric shock or injury.  
• This range hood uses 120V AC. Do not connect to other voltage since fire, electric  
shock or damage could result.  
Remove the nut from the conduit  
connector at the end of power wiring.  
1
WARNING  
Be sure to switch power OFF at service panel  
before wiring.  
Remove one screw fixing the wire cover and  
detach it.  
2
Connect the conduit through the connecting hole  
of the body using the nut previously removed.  
3
10  
 
INSTALLATION (continued)  
Connect the electrical wires as follows:  
Connect wires tightly and securely using wire connectors (not supplied).  
4
5
• Black to Black  
• White to White  
• Green to Green  
Replace the wire cover with the screw removed previously. Make sure that all  
wires are connected properly and enclosed inside of the wiring compartment.  
11  
 
INSTALLATION (continued)  
4. FINAL ASSEMBLY AND CHECK  
One 40 W light bulb (not supplied) can be mounted to this range hood.  
Prior to final assembly, install a light bulb (ordinary type, in the base diameter  
17 mm: intermediate base), rated 120 V-40 W or below.  
Assembly  
Replace the front cover with 4 screws.  
1
CAUTION  
To prevent the screw holes from being damaged, be sure to tighten the screws with  
the torque of 13 inch-lbs. (1.5 N-m) or less.  
Check  
(1) Turn on the electrical circuit to the range hood.  
(2) Make sure that the switch and light operate correctly. Refer to page 4 of the  
2
Operation Manual.  
(3) Check the ventilating functions at Hi, Me and Lo positions.  
(4) Make sure that the range hood has no abnormal noises and/or vibration.  
CAUTION  
To reduce the risk of injury, keep your hands and other objects away from the fan  
while it is in motion.  
• Wear working gloves to avoid injury.  
12  
 
INSTALLATION (continued)  
5. EXPLANATION TO THE END USER  
(1) Refer to the Operation Manual, explain the operation of this range hood to end  
users.  
(2) The Installation Manual and Operation Manual should be given to the end user.  
CIRCUIT DIAGRAM  
120V 60Hz  
Motor  
Green  
White Black  
Connector  
Terminal  
Capacitor  
Red  
White  
Orange  
Brown  
Blue  
Red  
Bulb:Max40W  
Connector  
Blue  
Brown  
Orange  
White  
Black  
Green  
Red  
Control Switch  
13  
 
Fuji Industrial USA, Inc.  
16300 Christensen Rd., Ste-212 Seattle,WA 98188-3403  
Telephone: 1-888-547-9880  
1U030584  
 

Edelbrock Camera Accessories 4779 User Manual
Eizo Computer Monitor RadiForce R12 User Manual
ETI Sound Systems INC Stereo Amplifier Matrix 200 User Manual
Faber Ventilation Hood 630006498 User Manual
Fender Musical Instrument Amplifier 57 deluxeTM User Manual
Garland Griddle RGM 2424 1 User Manual
GE Answering Machine 55927740 User Manual
GE Headphones 98991 User Manual
GE Microwave Oven JES0734PMRR User Manual
Generac Power Systems Portable Generator NP 30G User Manual