Flying Mole Stereo Amplifier MAS160 User Manual

SafetyInstructions  
1
Stereo Power Amplifier  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
MA–S160  
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICE  
ABLE PARTS INSIDE. REFER SERVICING TO QUALI-FIED SERVICE PERSONNEL.  
THIS SYMBOL INDICATES THAT DANGEROUS  
VOLTAGE CONSTITUTING A RISK OF ELECTRIC  
SHOCK IS PRESENT WITHIN THIS UNIT.  
THIS SYMBOL INDICATES THAT THERE ARE IMPOR-  
TANT OPERATING AND MAINTENANCE INSTRUC-  
TIONS IN THE OWNER’S MANUAL WITH THIS UNIT.  
Owner’s Manual  
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  
The important safety instructions  
Thank you for purchasing the MA–S160.  
In order to use the product in a safe manner, please read this Owner’s  
Manual thoroughly before using.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
Also, keep this manual for future reference.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-  
fiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third  
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operated normally, or has been dropped.  
Accessory Checklist  
Before proceeding with the setup, make sure that the following accessory is included in the package.  
If it is missing, please contact the dealer whom you purchased the amplifier from, or Flying Mole Corp.  
THE APPARATUS IS NOT WATERPROOF. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS APPARATUS, SUCH  
AS VASE, FLOWER POT, COSMETICS CONTAINER AND MEDICINE BOTTLE, ETC.  
• Remote Connection • Remote Power Control  
Cable (2m) x 1 Connector x 2  
• Owner's Manual  
(this booklet) x 1  
• AC Power Cable x 1  
IMPORTANT NOTICE  
If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”,  
please try to eliminate the problem by using one of the following measures :  
Relocate either this product or the device that is being affected by the interference.  
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the antenna.  
If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.  
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute  
this type of product. If you can not locate the appropriate retailer, please contact Flying Mole Corporation.  
Features  
2
Component Names  
FIXED (Switch position: Right)  
The amplifier works as a stereo power  
eREMOTE POWER CONTROL Jacks  
Independent power twin monaural construction  
OUT  
Utilizing our original Bi-Phase PWM amplifier technology to realize a new level of high  
Remote output jacks used to interlock the power  
on another device with the activation/deactivation  
of the power on the amplifier.  
amplifier (100W/8 ohms x 2 CH). Use  
the INPUT jacks (FIXED) y as input  
jacks.  
sound quality with superb high-speed responsiveness and wide dynamic range  
Connect these jacks to a Flying Mole product  
equipped with remote power control input jacks.  
IN  
The LEVEL adjustment knobs w on the  
front panel are bypassed and inoper-  
able.  
Fixed level (volume bypass) and Variable level are selectable  
Connect the amplifier in bridge (BTL) connection to use it as a 300W/8mono bloc  
Remote input jacks used to interlock the power  
on the amplifier with the activation/deactivation of  
the power on another device.  
Connect these jacks to a Flying Mole product  
equipped with remote power control output jacks.  
power amplifier  
MONO/BTL (Switch position: Left)  
The amplifier works as a monaural am-  
plifier in BTL mode (300W/8 ohms x 1  
CH). Use the [R] jack of the INPUT jacks  
(VARIABLE) y as the input jack.  
Gorgeous parts for uncompromising standards  
Turn “OFF” the power switch of the amplifier to use  
the amplifier with cables connected to these jacks.  
The input signal level can be adjusted  
with the [RIGHT] knob of the LEVEL  
adjustment knobs w on the front panel.  
ComponentNames  
3
* Refer to the owner's manuals of the devices to be  
connected as well.  
* These jacks cannot be used with products from  
other manufactures or for other purposes than the  
above-mentioned purpose.  
yINPUT Jacks (VARIABLE)  
Used to connect the input signal to the amplifier.  
Connect the jacks to the OUTPUT jacks on the pream-  
plifier, etc.  
Front Panel  
One each cable can be connected to the [R] and [L]  
jacks when the mode switch áD is set to "VARIABLE".  
Connect only the [R] jack when the mode switch áD  
is set to "MONO/BTL".These jacks are not to be used  
when the mode switch áD is set to "FIXED".  
rSPEAKER Connectors (* Be sure to check po-  
larity before connection)  
Used to connect the amplifier to the speaker.  
Connect one each speaker to the [RIGHT] and  
[LEFT] connectors when the Mode switch t is set  
to "FIXED" or "VARIABLE".  
uINPUT Jacks (FIXED)  
Make sure that the speaker's impedance is between  
4 ohms and 16 ohms.  
q
w
Used to connect the input signal to the amplifier.  
Connect the jacks to the OUTPUT jacks on the pream-  
plifier, etc.  
Connect one speaker to the two outermost connec-  
tors of the four [RIGHT] and [LEFT] connectors when  
the Mode switch t is set to "MONO/BTL".  
Make sure that the speaker's impedance is between  
8 ohms and 16 ohms.  
q Power Switch / Power Indicator  
w LEVEL Adjustment Knobs  
One each cable can be connected to the [R] and [L]  
jacks when the Mode switch t is set to "FIXED".  
These jacks are not to be used when the Mode switch  
t is set to "VARIABLE" or "MONO/BTL".  
Used to turn the amplifier's power ON or OFF.  
The indicator lights when the power is turned ON.  
Controls the input signal level.  
Setting the knob to "MIN" turns down the level to  
the minimum.  
Refer to the “r Connections” for details.  
These knobs don't work when the Mode switch t  
is set to "FIXED".When the Mode switch t is set to  
"MONO/BTL", only the [RIGHT] knob will work .  
iAC IN Jack  
tMode switch  
Used to connect the supplied AC power cable to the  
amplifier.  
Used to switch the operation mode of the amplifier.  
Select one of the following settings according to the  
connection.  
Rear Panel  
Connect the other end of the AC power cable to  
household AC outlet.  
VARIABLE (Switch position: Center)  
The amplifier works as a stereo power  
amplifier (100W/8 ohms x 2 CH). Use  
the INPUT jacks (VARIABLE) y as in-  
put jacks.  
The input signal level can be adjusted  
with the LEVEL adjustment knobs w  
on the front panel.  
e
i
r
t
y
u
r
 

Ecom Instruments PDAs Smartphones 2880 mAh User Manual
Edimax Technology Network Card EW 7108PCg User Manual
Estate Dishwasher TUD1000R User Manual
Extron electronic Switch YCS SW2 User Manual
Fender Stereo System Micro Compre User Manual
Fitness Quest Home Gym 80e User Manual
GE Convection Oven ZET857BBBB User Manual
Gemini CD Player MPX 3 User Manual
GE Refrigerator 200D9366P004 User Manual
Goodman Mfg Gas Heater CVM96 User Manual