Model 101BP
Transmitter Programming Guide
This transmitter is designed for use with your upgrade
remote start unit and is programmed by using the remote
start's program switch in combination with the transmitter
button. Although this transmitter can be programmed into any
of the Audiovox remote start and/or alarm, remote start
systems, it will offer limited use and should be used for the
remote start upgrade only.
To program this transmitter into your remote start upgrade
unit:
1) Turn the ignition to the on position.
2) Press and release the programming switch 3 times.
3) Press and hold, for 3 seconds, the button of the transmit-
ter you wish to add until the parking light flashes, indicating
the transmitter has been learned.
4) Repeat step 3 for each transmitter up to a total of 4
transmitters.
5) Turn the ignition off to exit the program mode.
NOTE: Do not allow more than 15 seconds to lapse between
steps or the program mode will automatically exit and you
will have to start over.
128-8802
1 of 4
ORDER FORM
FOR TRANSMITTER 101BP
Attention: Transmitter Ordering Department
Important: To help us expedite your order, please
print all of the information legibly and mail this form
and your payment according to the instructions
below.
1) Name:_____________________________________
2) Address:_________________________________________
3) City:________________State:________Zip Code:__________
4 Telephone Number: (
)_____________________
5) Total Number Of Transmitters Required:_______
Cost Per Transmitter is:
Multiply By Number Of Transmitters
$65.00
X
6) Enter Total Amount Enclosed
_______
(New York State Residents must include the appropriate sales tax.)
7) Method of Payment:
Mastercard
Visa
Check or Money Order (do not send cash)
Make Checks Payable To Audiovox Corporation
Credit Card Number:___________________________________
Credit Card Expiration Date:
____/___/____
8) Mail this form along with your payment to:
Transmitter Ordering Department
Audiovox Corporation 150 Marcus Blvd., Hauppauge N.Y.
11788
Credit card purchasers can order additional or replacement
transmitters by phone. Simply dial 1 - 800 - 645 - 4994, and
follow the instructions from the operator interface.
2
128-8802
3 of 4
This Page Intentionally Left Blank
© 2010 Audiovox Electronics Corp., Hauppauge, N.Y. 11788
128-8802
128-8802
4 of 4
|
2Wirer HDCR 1230G User Manual
Acer Computer Monitor X173 User Manual
ADTRAN Network Card E220 HFAC HDSL User Manual
ADTRAN Power Supply 1203019L2 User Manual
Agri Fab Universal Remote 45 02651 User Manual
Aiwa CD Player CX NA222 User Manual
Amana Clothes Dryer NED5200TQ User Manual
Avenview Switch SW HDM3D C5 8X8 User Manual
Avery Printer 7411 User Manual
Behringer Speaker B2031 User Manual