SHOWER WALLS
FOR ALCOVE INSTALLATION
DUPONT CORIAN®
SHOWER WALLS FOR ALCOVE INSTALLATION
Product Features:
• Dupont Corian® surface
• High gloss surface finish
• Simulated grout lines for luxurious tile
appearance
• Finished edge treatment
• Concealed corner and wall seams
• Premium wall height
• Installs over bath grade water proof
dry wall
❏ 4834.LSW
❏ 6034.LSW
Shown with 4834.ST Shower Base and 4834.STE2
Shower Enclosure (not included)
To Be Specified - Required:
❏ Color: (see below)
To Be Specified - Optional:
❏ Soap Dish: 9030.000 (specify color - see below)
COLOR
ABBREV. CODE
SOLIDS
GLACIER WHITE
GLW
950
PATTERNS
AURORA
DUSK
VENARO WHITE
Backwall Panel (1 ea.)
Side Panels
(2 ea.)
Corner Panels
(2 ea.)
AUR
SDK
VEW
996
998
965
Model No.
6034.LSW
Upper (tongue)
Lower (groove)
32-3/4 W x 76 H
1-1/2 x 1-1/2 x 76 H
57-1/2 W x 29 H
(832 x 1930mm) (38 x 38 x 1930mm) (1461 x 737mm)
57-1/2 W x 47 H
(1461 x 1194mm)
4834.LSW
32-3/4 W x 76 H 1-1/2 x 1-1/2 x 76 H 45-1/2 W x 28 H 45-1/2 W x 48-1/8 H
(832 x 1930mm) (38 x 38 x 1930mm) (1156 x 711mm) (1156 x 1222mm)
NOTES:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH SHOWER
WALLS FOR ADDITIONAL INFORMATION.
OPTIONAL SOAP DISH 9030.000 AVAILABLE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard Z124.3.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
H145
Revised 4/04
© 2008 AS America Inc.
|